Physical Values
CONNECTOR TERMINAL REFERENCE CHART
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (B) | Ground | GND | - | Ignition switch ON | - | 0 V |
| 2 (Y) | Ground | Inverter VCC | Input | Ignition switch ACC | - | 9 V |
| 3 (O) | Ground | Signal VCC | Input | Ignition switch ACC | - | 9 V |
| 4 (V) | Ground | AUX image GND | - | Ignition switch ON | - | 0 V |
| 5 | - | Shield | - | - | - | - |
| 6 (L) | Ground | RGB signal (G: green) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 7 | - | Shield | - | - | - | - |
| 8 (R) | Ground | Horizontal synchronizing (HP) signal | Output | Ignition switch ON | - | |
| 9 (V) | Ground | RGB area (YS) signal | Input | Ignition switch ON | At RGB image is displayed | 5 V |
| At AUX image is displayed | ||||||
| 11 (LG) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting display-brightness. | |
| 13 (BR) | Ground | Inverter GND | - | Ignition switch ON | - | 0 V |
| 14 (LG) | Ground | Signal GND | - | Ignition switch ON | - | 0 V |
| 15 (SB) | Ground | AUX image signal | Input | Ignition switch ON | At AUX image is displayed | |
| 17 (G) | Ground | RGB signal (R: red) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 18 (P) | Ground | RGB signal (B: blue) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 19 (W) | Ground | RGB synchronizing signal | Input | Ignition switch ON | - | |
| 20 (G) | Ground | Vertical synchronizing (VP) signal | Output | Ignition switch On | - | |
| 21 | - | Shield | - | - | - | - |
| 22 (L) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting display-brightness. | |
| 23 | - | Shield | - | - | - | - |
TERMINAL CONDITION REFERENCE VALUE CHART
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (B) | Ground | GND | - | Ignition switch ON | - | 0 V |
| 2 (Y) | Ground | Inverter VCC | Input | Ignition switch ACC | - | 9 V |
| 3 (O) | Ground | Signal VCC | Input | Ignition switch ACC | - | 9 V |
| 4 (V) | Ground | AUX image GND | - | Ignition switch ON | - | 0 V |
| 5 | - | Shield | - | - | - | - |
| 6 (L) | Ground | RGB signal (G: green) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 7 | - | Shield | - | - | - | - |
| 8 (R) | Ground | Horizontal synchronizing (HP) signal | Output | Ignition switch ON | - | |
| 9 (V) | Ground | RGB area (YS) signal | Input | Ignition switch ON | At RGB image is displayed | 5 V |
| At AUX image is displayed | ||||||
| 11 (LG) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting display-brightness. | |
| 13 (BR) | Ground | Inverter GND | - | Ignition switch ON | - | 0 V |
| 14 (LG) | Ground | Signal GND | - | Ignition switch ON | - | 0 V |
| 15 (SB) | Ground | AUX image signal | Input | Ignition switch ON | At AUX image is displayed | |
| 17 (G) | Ground | RGB signal (R: red) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 18 (P) | Ground | RGB signal (B: blue) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 19 (W) | Ground | RGB synchronizing signal | Input | Ignition switch ON | - | |
| 20 (G) | Ground | Vertical synchronizing (VP) signal | Output | Ignition switch On | - | |
| 21 | - | Shield | - | - | - | - |
| 22 (L) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting display-brightness. | |
| 23 | - | Shield | - | - | - | - |