LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G35 x >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System >> Base Audio Without Navigation >> Ecu Diagnosis >> Av Control Unit >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

CONNECTOR TERMINAL REFERENCE CHART

Terminal (Wire color) Description Condition Reference value (Approx.)
+ - Signal name Input/Output
2 (L) 3 (W) Sound signal door speaker LH Output Ignition switch ON Voice output
G04879120
4 (LG) 5 (SB) Sound signal rear speaker LH Output Ignition switch ON Voice output
G04879120
6 (P) 15 (B) Steering switch signal A Input Ignition switch ON Keep pressing SOURCE switch. 0 V
Keep pressing switch. 0.7 V
Keep pressing switch. 1.3 V
Except for above. 3.3 V
7 (V) Ground ACC power supply Input Ignition switch ACC - Battery voltage
9 (L) Ground Illumination signal Input OFF Lighting switch is OFF. 0 V
Lighting switch is ON. 12 V
11 (BR) 12 (R) Sound signal door speaker RH Output Ignition switch ON Voice output
G04879120
13 (L) 14 (P) Sound signal rear speaker RH Output Ignition switch ON Voice output
G04879120
15 (B) Ground Steering switch signal GND - Ignition switch ON - 0 V
16 (L) 15 (B) Steering switch signal B Input Ignition switch ON Keep pressing VOL DOWN switch. 0 V
Keep pressing VOL UP switch. 0.7 V
Except for above. 3.3 V
19 (Y) Ground Battery power supply Input Ignition switch OFF - Battery voltage
20 (B) Ground GND - Ignition switch ON - 0 V
22 (B) 21 (W) Satellite radio sound signal LH Input Ignition switch ON When satellite radio mode is selected
G04879120
24 (G) 23 (R) Satellite radio sound signal RH Input Ignition switch ON When satellite radio mode is selected
G04879120
25 - Shield - - - -
26 - Shield - - - -
28 (P) Ground Request signal (SAT→CONT) Input Ignition switch ON When satellite radio mode is selected
G04890005
29 (G) Ground Communication signal (SAT→CONT) Input Ignition switch ON When satellite radio mode is selected
G04890006
30 (L) Ground Communication signal (CONT→SAT) Output Ignition switch ON When satellite radio mode is selected
G04890037
33 - FM sub Input - - -
34 - AM-FM main Input - - -
35 Ground Antenna amp. ON signal Output Ignition switch ACC - 12 V
36 (SB) Ground AUX image signal Output Ignition switch ON At AUX image is displayed
G04890020
37 (V) Ground AUX image GND - Ignition switch ON - 0 V
38 (P) Ground RGB signal (B: blue) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219860
39 (L) Ground RGB signal (G: green) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219859
40 (G) Ground RGB signal (R: red) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219858
41 (W) Ground RGB synchronizing signal Output Ignition switch ON -
G04879209
42 - Shield - - - -
43 (V) Ground RGB area (YS) signal Output Ignition switch ON At RGB image is displayed 5 V
At AUX image is displayed
G05219862
44 (L) Ground Communication signal (DISP→CONT) Input Ignition switch ON When adjusting display-brightness.
G05219856
45 (R) Ground Horizontal synchronizing (HP) signal Input Ignition switch ON -
G04923333
46 (LG) Ground Signal GND - Ignition switch ON - 0 V
47 (O) Ground Signal VCC Output Ignition switch ACC - 9 V
49 - Shield - - - -
50 - Shield - - - -
55 - Shield - - - -
56 (LG) Ground Communication signal (CONT→DISP) Output Ignition switch ON When adjusting display-brightness.
G05219856
57 (G) Ground Vertical synchronizing (VP) signal Input Ignition switch ON -
G04923331
58 (BR) Ground Inverter GND - Ignition switch ON - 0 V
59 (Y) Ground Inverter VCC Output Ignition switch ACC - 9 V
66 (G) Ground AUX image signal Input Ignition switch ON When AUX mode is selected
G04890020
73 - Shield - - - -
74 (R) Ground AUX image signal GND - Ignition switch ON - 0 V
85 (B) Ground GND - Ignition switch ON - 0 V
86 (L) - CAN-H Input/Output - - -
87 (P) - CAN-L Input/Output - - -
88 (V) - AV communication signal (H) Input/Output - - -
89 (LG) - AV communication signal (L) Input/Output - - -
90 (SB) - AV communication signal (H) Input/Output - - -
91 (Y) - AV communication signal (L) Input/Output - - -
95 (W) Ground AUX sound signal RH Input Ignition switch ON When AUX mode is selected
G04879120
96 (R) Ground AUX sound signal LH Input Ignition switch ON When AUX mode is selected
G04879120
97 - Shield - - - -
101 (BR) Ground SW GND - Ignition switch ON - 0 V
103 (SB) Ground Eject signal Input - Pressing the eject switch 0 V
Except for above 3.3 V
104 (G) Ground Ignition signal Input Ignition switch ON - Battery voltage
105 (O) Ground Reverse signal Input Ignition switch ON R position 12 V
Other than R position 0 V
106 (SB) Ground Parking brake signal Input Ignition switch ON Parking brake ON 0 V
Parking brake OFF
G05223673
107 (GR) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON When vehicle speed is approx. 40 km/h (25 MPH)
NOTE: Maximum voltage may be 12 V due to specifications (connected units).
G04879210


TERMINAL CONDITION REFERENCE VALUE CHART

Terminal (Wire color) Description Condition Reference value (Approx.)
+ - Signal name Input/Output
6 (P) 15 (B) Steering switch signal A Input Ignition switch ON Keep pressing SOURCE switch. 0 V
Keep pressing ↑ switch. 0.7 V
Keep pressing ↓ switch. 1.3 V
Keep pressing HANDS FREE switch 2 V
Except for above. 3.3 V
7 (V) Ground ACC power supply Input Ignition switch ACC - Battery voltage
9 (L) Ground Illumination signal Input OFF Lighting switch is OFF. 0 V
Lighting switch is ON. 12 V
15 (B) Ground Steering switch signal GND - Ignition switch ON - 0 V
16 (L) 15 (B) Steering switch signal B Input Ignition switch ON Keep pressing VOL DOWN switch. 0 V
Keep pressing VOL UP switch. 0.7 V
Keep pressing PHONE switch. 1.3 V
Except for above. 3.3 V
19 (Y) Ground Battery power supply Input Ignition switch OFF - Battery voltage
20 (B) Ground GND - Ignition switch ON - 0 V
22 (B) 21 (W) Satellite radio sound signal LH Input Ignition switch ON When satellite radio mode is selected
G04879120
24 (G) 23 (R) Satellite radio sound signal RH Input Ignition switch ON When satellite radio mode is selected
G04879120
25 - Shield - - - -
26 - Shield - - - -
27 (SB) Ground Mode change signal Output Ignition switch ON Driver's Audio Stage ON 0 V
Driver's Audio Stage OFF 8.5 V
28 (P) Ground Request signal (SAT→CONT) Input Ignition switch ON When satellite radio mode is selected
G04890005
29 (G) Ground Communication signal (SAT→CONT) Input Ignition switch ON When satellite radio mode is selected
G04890006
30 (L) Ground Communication signal (CONT→SAT) Output Ignition switch ON When satellite radio mode is selected
G04890037
33 - FM sub Input - - -
34 - AM-FM main Input - - -
35 Ground Antenna amp. ON signal Output Ignition switch ACC - 12 V
36 (SB) Ground AUX image signal Output Ignition switch ON At AUX image is displayed
G04890020
37 (V) Ground AUX image ground - Ignition switch ON - 0 V
38 (P) Ground RGB signal (B: blue) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219860
39 (L) Ground RGB signal (G: green) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219859
40 (G) Ground RGB signal (R: red) Output Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen.
G05219858
41 (W) Ground RGB synchronizing signal Output Ignition switch ON -
G04879209
42 - Shield - - - -
43 (V) Ground RGB area (YS) signal Output Ignition switch ON At RGB image displayed 5 V
At AUX image is displayed
G05219862
44 (L) Ground Communication signal (DISP→CONT) Input Ignition switch ON When adjusting display-brightness.
G05219856
45 (R) Ground Horizontal synchronizing (HP) signal Input Ignition switch ON -
G04923333
46 (LG) Ground Signal GND - Ignition switch ON - 0 V
47 (O) Ground Signal VCC Output Ignition switch ACC - 9 V
49 - Shield - - - -
50 - Shield - - - -
55 - Shield - - - -
56 (LG) Ground Communication signal (CONT→DISP) Output Ignition switch ON When adjusting display-brightness.
G05219856
57 (G) Ground Vertical synchronizing (VP) signal Input Ignition switch ON -
G04923331
58 (BR) Ground Inverter GND - Ignition switch ON - 0 V
59 (Y) Ground Inverter VCC Output Ignition switch ACC - 9 V
66 (G) Ground AUX image signal Input Ignition switch ON At AUX image is displayed
G04890020
73 - Shield - - - -
74 (R) Ground AUX image signal GND - Ignition switch ON - 0 V
80 (L) 79 (P) TEL voice signal Input Ignition switch ON During voice guide output with the switch pressed
G04879120
81 - Shield - - - -
83 (B) 82 (G) iPod sound signal RH Input Ignition switch ON When iPod mode is selected
G04879120
85 (B) Ground GND - Ignition switch ON - 0 V
86 (L) - CAN-H Input/Output - - -
87 (P) - CAN-L Input/Output - - -
88 (V) - AV communication signal (H) Input/Output - - -
89 (LG) - AV communication signal (L) Input/Output - - -
90 (SB) - AV communication signal (H) Input/Output - - -
91 (Y) - AV communication signal (L) Input/Output - - -
95 (W) Ground AUX sound signal RH Input Ignition switch ON When AUX mode is selected
G04879120
96 (R) Ground AUX sound signal LH Input Ignition switch ON When AUX mode is selected
G04879120
97 - Shield (AUX sound signal GND) - - - -
99 (R) 98 (W) iPod sound signal LH Input Ignition switch ON When iPod mode is selected
G04879120
101 (BR) Ground SW GND - Ignition switch ON - 0 V
103 (SB) Ground Eject signal Input - Pressing the eject switch 0 V
Except for above 3.3 V
104 (G) Ground Ignition signal Input Ignition switch ON - Battery voltage
105 (O) Ground Reverse signal Input Ignition switch ON R position 12 V
Other than R position 0 V
106 (SB) Ground Parking brake signal Input Ignition switch ON Parking brake ON 0 V
Parking brake OFF
G05223673
107 (GR) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON When vehicle speed is approx. 40 km/h (25 MPH)
NOTE: Maximum voltage may be 12 V due to specifications (connected units).
G04879210
108 (BR) 114 (Y) Sound signal rear RH Output Ignition switch ON Voice output
G04879120
109 (R) 115 (G) Sound signal front RH Output Ignition switch ON Voice output
G04879120
110 (SB) Ground Amp. ON signal Output Ignition switch ON - 10 V
112 (V) 118 (LG) Sound signal rear LH Output Ignition switch ON Voice output
G04879120
113 (O) 119 (W) Sound signal front LH Output Ignition switch ON Voice output
G04879120
scientia non olet · About LEMON Manuals