DTC Confirmation Procedure

1. PERFORM DTC CONFIRMATION PROCEDURE 1
   1. Press the push-button ignition switch under the following conditions and wait for at least 1 second.

      A/T models 

      • A/T selector lever is in the P or N position
      • Do not depress brake pedal

      M/T models 

      • Do not depress clutch pedal
   2. Check "Self diagnostic result" with CONSULT-III.

   Is DTC detected? 

   YES: Go to "DIAGNOSIS PROCEDURE ".

   NO: GO TO  2.

2. PERFORM DTC CONFIRMATION PROCEDURE 2

1. Turn ignition switch ON.
2. Turn ignition switch OFF.
3. Press driver side door switch and wait for at least 1 second.
4. Check "Self diagnostic result" with CONSULT-III.

Is DTC detected? 

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END