DTC Detection Logic
NOTE:
- If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC
.
- If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to
"DTC LOGIC ".
DTC DETECTION CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B210D |
STARTER RELAY ON |
IPDM E/R detects that the relay is stuck at ON position even if the followings condition are met for about 1 second.
- Starter control relay ON/OFF signal from BCM
- Clutch interlock or park neutral position (PNP) switch input
|
|