DTC Detection Logic

NOTE:

If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B2602 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC DETECTION CONDITION CHART

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2602	SHIFT POSITION	BCM detects the following status for 10 seconds. Shift position is in P position Vehicle speed is 4 km/h (2.5 MPH) or more Ignition switch is in the ON position	Harness or connectors (A/T device circuit is open or shorted) A/T device (detention switch) ABS actuator and electric unit (control unit)