Data Monitor
WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR
| Monitor Item | Condition |
|---|---|
| PUSH SW | Indicates [ON (pressed)/OFF (released)] condition of ignition knob switch. |
| KEY SW | Indicates [ON (inserted)/OFF (removed)] condition of key switch. |
| DR REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side). |
| AS REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger side). |
| BD/TR REQ SW | Indicates [ON (pressed)/OFF (released)] condition of door request switch (back door). |
| IGN SW | Indicates [ON (ON or START position)/OFF (other than ON and START position)] condition of ignition switch ON position. |
| ACC SW | Indicates [ON/OFF] condition of ignition switch ACC position. |
| STOP LAMP SW | Indicates [ON/OFF] condition of stop lamp switch. |
| DOOR LOCK SIG | Indicates [ON/OFF] condition of LOCK signal from Intelligent Key. |
| DOOR UNLOCK SIG | Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key. |
| DOOR SW DR | Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN communication. |
| DOOR SW AS | Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via CAN communication. |
| DOOR SW RR | Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN communication. |
| DOOR SW RL | Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN communication. |
| DOOR BK SW | Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communication. |
| VEHICLE SPEED | Displays the vehicle speed signal received from combination meter by numerical value [km/h]. |