Operation Prohibition Condition

OPERATION PROHIBITION CONDITION

Condition

When seat belt is not fastened (Only the seat belt that is not fastened does not operate)
When the vehicle speed is 15 km/h or less
When pre-crash seat belt continuously operates 3 times or more ⁽¹⁾
At fail-safe condition ⁽²⁾

⁽¹⁾	When pre-crash seat belt does not operate after it continuously operates 3 times or more, operation can be performed again by stopping operation for approximately 7 minutes.

⁽²⁾	Refer to "FAIL SAFE " for details of fail-safe mode.

Fig 1: Pre-Crash Seat Belt System Flow Chart

Courtesy of NISSAN MOTOR CO., U.S.A.

Refer to "SYSTEM DESCRIPTION " for details of operation condition.