LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner >> Component Diagnosis >> Power Walk-In Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION
    1. Select "WALK-IN SW" in "Data Monitor" mode with CONSULT-III.
    2. Check the power walk-in switch signal under the following condition.
      WALK-IN SWITCH REFERENCE

      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

    Is the indication normal? 

    YES: INSPECTION END

    NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals