DRIVER SIDE : Diagnosis Procedure

Initialization procedure is executed and operation is confirmed.

Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : SPECIAL REPAIR REQUIREMENT ".

Is the inspection result normal? 

YES: INSPECTION END

NO: GO TO  2.

Check encoder (driver side) circuit.

Refer to "DRIVER SIDE : COMPONENT FUNCTION CHECK ".

Is the inspection result normal? 

YES: GO TO  3.

NO: Repair or replace the malfunctioning parts.

Check power window serial link (power window main switch)

Refer to "POWER WINDOW MAIN SWITCH : COMPONENT FUNCTION CHECK "

Is the result normal? 

YES: GO TO  4.

NO: Repair or replace the malfunctioning parts

Confirm the operation again.

Is the result normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.