Component Function Check
- BRAKE WARNING LAMP OPERATION CHECK 1
Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?
YES: GO TO 2.
NO: Go to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
- BRAKE WARNING LAMP OPERATION CHECK 2
Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake lever (M/T models) or the parking brake pedal (A/T models).
Is the inspection result normal?
YES: INSPECTION END
NO: Check parking brake switch. Refer to "DIAGNOSIS PROCEDURE ".