LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> IPDM E/R >> On-Vehicle Repair >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Disconnect the battery cable from the negative terminal.
  2. Remove cowl top cover (RH). Refer to "EXPLODED VIEW ".
  3. Pull up the IPDM E/R assembly while pressing the pawl (A) on the back of the IPDM E/R cover B (1).
    Fig 1: Identifying IPDM E/R Cover And Pawl
    G04889515Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the IPDM E/R cover A while pressing the pawl (A) at the lower end of the IPDM E/R cover A (1).
  5. Disconnect the harness connector and remove IPDM E/R (2).
    Fig 2: Identifying IPDM E/R And Cover
    G04889516Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove the bolt (A) and remove the bracket (1) from the vehicle.
    Fig 3: Identifying IPDM E/R Bracket And Bolt
    G04889517Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals