LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> Ecu Diagnosis >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Fail Safe >> Front Wiper Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wiper Control

IPDM E/R detects front wiper stop position by a front wiper auto stop signal.

When a front wiper auto stop signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10 seconds activation and 20 seconds stop five times.

FRONT WIPER SWITCH REFERENCE

Ignition switch Front wiper switch Front wiper auto stop signal
ON OFF The front wiper auto stop signal (stop position) cannot be input for 10 seconds.
ON The front wiper auto stop signal does not change for 10 seconds.
NOTE: This operation status can be confirmed on the IPDM E/R "Data Monitor" that displays "BLOCK" for the item "WIP PROT" while the wiper is stopped.