Removal and Installation: BCM: Installation

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

NOTE:

When replacing BCM, it must be configured. Refer to , "CONFIGURATION : SPECIAL REPAIR REQUIREMENT ".
When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to INSPECTION AND ADJUSTMENT .
When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to "ID REGISTRATION PROCEDURE ".