Removal and Installation: BCM: Removal

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to , "CONFIGURATION : SPECIAL REPAIR REQUIREMENT ".

Disconnect the battery negative terminal.
Remove the lower knee protector. Refer to "REMOVAL AND INSTALLATION ".
Remove the screw and release the BCM.
Disconnect the connectors and then remove the BCM.

Fig 1: Identifying BCM

Courtesy of NISSAN MOTOR CO., U.S.A.