Procedure After Replacing ECM

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

When replacing ECM, the following procedure must be performed.

Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs.
Refer to "ECM RE-COMMUNICATING FUNCTION : SPECIAL REPAIR REQUIREMENT ".
Perform , "VIN REGISTRATION ".
Perform , "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
Perform , "THROTTLE VALVE CLOSED POSITION LEARNING ".
<Flexible Fuel Vehicle>
Perform , "ETHANOL MIXTURE RATIO ADAPTATION (FLEXIBLE FUEL VEHICLE) ".
Perform , "IDLE AIR VOLUME LEARNING ".