Physical Values

VOLTAGE REFERENCE CHART

Terminal No.		Wire color	Description		Condition	Value (Approx.)
+	-	Wire color	Signal name	Input/Output	Condition	Value (Approx.)
1	-	G	4WAS front motor V terminal	-	-	-
2	Ground	W	Front wheel angle sensor W terminal voltage	Output	Ignition switch: ON	0 - 5 V
3	-	B	4WAS front lock solenoid valve ground	-	-	-
4	Ground	Y	Front wheel angle sensor U terminal voltage	Output	Ignition switch: ON	0 - 5 V
5	-	BR	4WAS front motor U terminal	-	-	-
6	-	L	4WAS front motor W terminal	-	-	-
7	-	GR	Front wheel angle sensor ground	-	-	-
8	Ground	G/R	Front wheel angle sensor V terminal voltage	Output	Ignition switch: ON	0 - 5 V
10	Ground	R	4WAS front lock solenoid valve power supply	Output	Ignition switch: ON	Battery voltage
10	Ground	R	4WAS front lock solenoid valve power supply	Output	Ignition switch: OFF (Wait 10 min. or more.)	0 V
11	Ground	R	Power supply	Input	Ignition switch: ON	Battery voltage
11	Ground	R	Power supply	Input	Ignition switch: OFF	Battery voltage
12	Ground	B	4WAS front motor ground	-	Always	0 V
14	-	Y	BUS-L	-	-	-
15	Ground	LG	Ignition switch power supply	Input	Ignition switch: ON	Battery voltage
15	Ground	LG	Ignition switch power supply	Input	Ignition switch: OFF	0 V
18	Ground	B	Ground	-	Always	0 V
25	-	SB	BUS-H	-	-	-
34	Ground	B	Ground	-	Always	0 V

CAUTION: When using circuit tester to measure voltage for inspection, never forcibly extend any connector terminals.