LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (VQ35DE) - Component And System Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    BRAKE PEDAL CONDITION CHART

    Condition Continuity
    Brake pedal: Fully released. Should exist.
    Brake pedal: Slightly depressed. Should not exist.
  4. If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.
    Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
    G04900677Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals