Diagnosis Procedure
- CHECK CONTINUITY COMPOSITE SYNCHRONIZING SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect rear display unit connector and video distributor connector.
- Check continuity between rear display unit harness connector terminal 15 and video distributor harness connector terminal 33.
15 - 33: Continuity should exist.
- Check continuity between rear display unit harness connector terminal 15 and ground.
15 - Ground: Continuity should not exist.
Is the inspection result normal?
Yes: GO TO 2.
No: Repair harness or connector.
- CHECK RGB SYNCHRONIZING SIGNAL
- Connect rear display unit connector and video distributor connector.
- Turn ignition switch ON.
- Check signal between rear display unit harness connector terminal 15 and ground.TERMINAL VALUE TABLE
Terminal Condition Reference value 15 - Ground Ignition switch ON When AUX or DVD image is displayed on rear display unit.
Is the inspection result normal?
Yes: Replace rear display unit.
No: Replace video distributor.