Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
CONNECTOR TERMINALS REFERENCE TABLE
| Terminal (Wire color) |
Description | Condition | Reference value (Approx.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||||||
| 1 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V | ||||
| 2 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage | ||||
| 3 (V) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage | ||||
| 5 (BR) | Ground | Composite image ground (AUX image)(1) (DVD and AUX images)(2) |
- | Ignition switch ON | - | 0 V | ||||
| 6 (G/R) | Ground | RGB image signal (G: green) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 7 (P) | Ground | RGB image signal ground | - | Ignition switch ON | - | 0 V | ||||
| 8 (W) | Ground | Horizontal synchronizing (HP) signal | Output | Ignition switch ON | - | |||||
| 9 (G) | Ground | RGB area (YS) signal | Input | Ignition switch ON | When RGB image is displayed. | 5 V | ||||
| When rear view camera image is displayed. | ||||||||||
| 11 (O/L) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting front display brightness. | |||||
| 12 (W) | Ground | Camera image signal | Input | Ignition switch ON | When rear view camera image is displayed. | |||||
| 13 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V | ||||
| 14 | - | Shield | - | - | - | - | ||||
| 15 (B/R) | 5 (BR) | Composite image signal (AUX image signal)(1) (AUX and DVD image)(2) |
Input | Ignition switch ON | When AUX or DVD image is displayed. | |||||
| 17 (G/O) | Ground | RGB image signal (R: red) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 18 (G/Y) | Ground | RGB image signal (B: blue) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 19 (L) | Ground | RGB synchronizing signal | Input | Ignition switch ON | - | |||||
| 20 (R) | Ground | Vertical synchronizing (VP) signal | Output | Ignition switch ON | - | |||||
| 21 (B) | Ground | RGB synchronizing signal ground | - | Ignition switch ON | - | 0 V | ||||
| 22 (W/L) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting front display brightness. | |||||
|
||||||||||