CONSULT-III Function (BCM): Notes
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-III FUNCTION CHART
| BCM diagnosis position | Inspection items and diagnosis mode | Description |
|---|---|---|
| THEFT ALM | DATA MONITOR | Displays the input data to BCM in real time basis. |
| ACTIVE TEST | Gives a drive signal to a load to check the operation. | |
| WORK SUPPORT | Changes setting of each function. |
CAUTION:
CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunction might be detected in self-diagnosis depending on control units with carry out CAN communication.