Check Fuel Level Sensor Unit and Fuel Pump (Main)

Check resistance between terminals 2 and 5.

RESISTANCE SPECIFICATIONS

Terminal

Float position [mm (in)]

Resistance value [Ω]

⁽¹⁾

Full

210 (8.27)

Approx. 3

⁽²⁾

Empty

30 (1.18)

Approx. 80

⁽¹⁾	When float rod is in contact with stopper.

⁽²⁾	When float rod is in contact with stopper.

Fig 1: Checking Fuel Level Sensor Unit And Fuel Pump (Main)

Courtesy of NISSAN MOTOR CO., U.S.A.

If the results of check are NG, check the fuel level sensor unit and fuel pump (main) harness. Refer to "CHECK FUEL LEVEL SENSOR UNIT AND PUMP (MAIN) HARNESS ".