With Consult-III
- Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-III.
- Make sure that "COOLAN TEMP/S" indicates less than 70°C (158°F). If not, cool down the engine.
- Start engine.
- Hold vehicle at the following conditions for 12 seconds.ENGINE SPEED REFERENCE CHART
ENG SPEED 1, 550 - 3, 250 RPM (AWD models)
1, 450 - 3, 100 RPM (2WD models)VHCL SPEED SE 70 - 120 km/h (43 - 75 MPH) B/FUEL SCHDL Less than 31.8 msec Selector lever Suitable position - Check 1st trip DTC.
- If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".