LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VQ35DE) - DTCS P1220 To P2A03 >> DTC P1226: TP Sensor >> DTC Confirmation Procedure >> Testing Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

  1. Turn ignition switch ON.
  2. Turn ignition switch OFF, wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Repeat steps  2 and  3 for 32 times.
  5. Check 1st trip DTC.
  6. If 1st trip DTC is detected, go to "REMOVAL AND INSTALLATION ".