Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| No. 1 engine under cover x Body | for bolt | 29 | 296 | 21 |
| for nut | 5.4 | 55 | 48 in.*lbf | |
| Oil pan drain plug x Oil pan sub-assembly | 40 | 408 | 30 | |
| Oil filter cap x Oil filter bracket | 25 | 255 | 18 | |
| Oil filter drain plug x Oil filter cap | 13 | 127 | 9 | |
| Oil pressure sender gauge assembly x Oil filter bracket | 15 | 153 | 11 | |
| Relief valve plug x Oil pump cover | 53 | 540 | 39 | |
| Oil pump cover x Timing chain cover sub-assembly | 10 | 105 | 8 | |
| Timing chain cover sub-assembly x Cylinder block and cylinder head sub-assembly | for bolt A, B, C, nut | 23 | 235 | 17 |
| for bolt D, E, F | 47 | 479 | 35 | |
| Timing chain cover sub-assembly x belt tensioner | 23 | 235 | 17 | |
| Cylinder head cover sub-assembly RH x Camshaft housing sub-assembly RH | for bolt A | 21 | 214 | 15 |
| except bolt A | 12 | 122 | 9 | |
| Cylinder head cover sub-assembly RH x Noise filter | 7.0 | 71 | 62 in.*lbf | |
| Cylinder head cover sub-assembly LH x Camshaft housing sub-assembly LH | for bolt A | 21 | 214 | 15 |
| except bolt A | 12 | 122 | 9 | |
| Crankshaft pulley x Crankshaft | 300 | 3059 | 221 | |
| Wire harness clamp bracket x Timing chain cover sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| No. 1 idler pulley sub-assembly x Timing chain cover sub-assembly | 43 | 438 | 32 | |
| Water pump pulley x Water pump assembly | 21 | 214 | 15 | |
| Water inlet housing x Timing chain cover sub-assembly | 21 | 214 | 15 | |
| Cylinder head sub-assembly x Front water by-pass joint | 21 | 214 | 15 | |
| Cylinder head cover sub-assembly RH x Water by-pass pipe sub-assembly | 10 | 102 | 7 | |
| Cylinder head sub-assembly RH x Water by-pass pipe sub-assembly | 10 | 102 | 7 | |
| Oil filter bracket x Timing chain cover sub-assembly | 35 | 357 | 26 | |
| No. 2 water by-pass pipe x Front water by-pass joint (w/ Oil cooler) | 10 | 102 | 7 | |
| No. 2 water by-pass pipe x Timing chain cover sub-assembly (w/ Oil cooler) | 10 | 102 | 7 | |
| No. 2 water by-pass pipe x Oil filter bracket (w/ Oil cooler) | 10 | 102 | 7 | |
| No. 2 fuel tube sub-assembly x Cylinder head cover | 10 | 102 | 7 | |
| Ground wire x Body | 8.0 | 82 | 71 in.*lbf | |
| Ground wire x Cylinder head cover sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil filter bracket x Relief valve plug | 37 | 375 | 27 | |
| Oil cooler spacer x Oil filter bracket | 10 | 102 | 7 | |
| Oil cooler assembly x Oil filter bracket | 21 | 214 | 15 | |
| No. 1 oil cooler bracket x Oil filter bracket | 21 | 214 | 15 | |
| No. 1 oil cooler bracket x Cylinder block | 21 | 214 | 15 | |