LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly and Assembly >> Assembly >> Mainshaft Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mainshaft Assembly

  1. Install needle bearing to mainshaft.
    CAUTION: Apply ATF to periphery of needle bearing.
  2. Install sprocket and electric controlled coupling to mainshaft.
  3. Install spacer to main shaft.
    Fig 1: Applying ATF To Periphery Of Needle Bearing
    G05225383Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Install snap ring to mainshaft.
    CAUTION: Do not reuse snap ring.
  5. Install mainshaft assembly to rear case, then install front case and rear case. Refer to "FRONT CASE AND REAR CASE ".
    Fig 2: Identifying Snap Ring To Mainshaft
    G05225371Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals