Transfer Fluid: Replacement: Draining

Run the vehicle to warm up the transfer unit sufficiently.
Stop the engine, and remove the drain plug to drain the transfer fluid.
CAUTION: When draining fluid, protect exhaust tube flange with cover.
Apply sealant to drain plug. Install drain plug on transfer and tighten to the specified torque. Refer to "COMPONENTS ".
- Use Genuine Silicone RTV or equivalent. Refer to "RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS ".
  CAUTION: Remove old sealant adhering to mounting surfaces. Also remove any moisture, oil, or foreign material adhering to application and mounting surfaces.
  
  Fig 1: Applying Sealant To Drain Plug
  Courtesy of NISSAN MOTOR CO., U.S.A.