Terminals and Reference Value for PDU
TERMINALS AND REFERENCE VALUE CHART
| Terminal No. | Wire color | Item | Signal Input/Output | Condition | Voltage (V) (Approx.) | |
|---|---|---|---|---|---|---|
| Push-button ignition switch position | Operation or conditions | |||||
| 1 | P | Wake up signal | Input | LOCK | Sleep condition (30 seconds or more after all doors are closed under the condition that the power supply position is in the LOCK position) | Battery voltage |
| - | Wake-up condition (Open driver door) | 0 | ||||
| 2 | G | Starter control signal | Input | ON | At starter motor cranking | 0 |
| - | Any condition other than above | Battery voltage | ||||
| 3 | GR | Steering lock unit power source | Output | LOCK | Push-button ignition switch is pressed under the condition that Intelligent Key is in the vehicle or Intelligent Key is inserted | 0 → Battery voltage → 0 |
| - | Any condition other than above | 0 | ||||
| 6 | V | Steering lock control signal-1 | Input | - | Push-button ignition switch is pressed under the condition that Intelligent Key is in the vehicle or Intelligent Key is inserted | Battery voltage |
| LOCK | Power supply position is in LOCK position (Steering lock activated) |
Battery voltage → 0 → Battery voltage (Battery voltage is detected when activating the steering lock) |
||||
| 7 | LG | Steering lock control signal-2 | Input | - | Push-button ignition switch is pressed under the condition that Intelligent Key is in the vehicle or Intelligent Key is inserted | Battery voltage |
| LOCK | Power supply position is in LOCK position (Steering lock activated) |
Battery voltage → 0 → Battery voltage (Battery voltage is detected when activating the steering lock) |
||||
| 9 | O | Steering lock feed back signal | Output | - | Steering lock: Lock | 0 |
| LOCK | Steering lock: Unlock | 8 | ||||
| 10 | B | Ground | - | - | - | 0 |
| 11 | Y | IPDM E/R current signal | Output | START | At starter motor cranking | 5 |
| LOCK | Any condition other than above | 2 | ||||
| 12 | R | Feed back signal | Output | LOCK | Sleep condition (30 seconds or more after all doors are closed under the condition that the power supply position is in the LOCK position) | 1 |
| - | Wake-up condition (any condition other than above) | 0 | ||||
| 13 | R | Starter relay | Output | START | At starter motor cranking | Battery voltage |
| - | Any condition other than above | 4 | ||||
| 14 | SB | Power source (fuse) | Input | - | - | Battery voltage |
| 15 | L | Power source (fusible link) | Input | - | - | Battery voltage |
| 17 | G | Power source (fusible link) | Input | - | - | Battery voltage |