Inspection Procedure
- CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.
SELF-DIAGNOSIS RESULTSSelf-diagnosis results RAS CIRCUIT Is above displayed on the self-diagnosis display?
YES: GO TO 2.
No: INSPECTION END
- CHECK RAS CONTROL UNIT CIRCUIT
- Perform RAS control unit self-diagnosis. Repair or replace items indicated, then perform RAS control unit self-diagnosis again. Refer to "SELF-DIAGNOSIS PROCEDURE ".
- Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK: INSPECTION END
NG:
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".