Engine Control System (VK45DE) - Component And System Troubleshooting: VIAS: Wiring Diagram

Fig 1: EC-VIAS-01 - Wiring Diagram

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

SPECIFICATION DATA

TERMINAL NO.	WIRE COLOR	ITEM	CONDITION	DATA (DC Voltage)
29	V	VIAS control solenoid valve	[Engine is running]  Selector lever: P or N	0 - 1.0V
			[Engine is running]  Selector lever: D Engine speed: Below 5, 000 rpm	BATTERY VOLTAGE (11 - 14V)
			[Engine is running]  Engine speed: Above 5, 000 rpm	0 - 1.0V
111	SB	ECM relay (Self shut-off)	[Engine is running]  [Ignition switch: OFF]  For a few seconds after turning ignition switch OFF	0 - 1.5V
			[Ignition switch: OFF]  More than a few seconds after turning ignition switch OFF	BATTERY VOLTAGE (11 - 14V)
119 120	R R	Power supply for ECM	[Ignition switch: ON]	BATTERY VOLTAGE (11 - 14V)