Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Air pump inlet x Air pump bracket | 8.0 | 82 | 71 in.*lbf | |
| Air pump bracket x Body panel | for bolt | 18 | 184 | 13 |
| for nut | 12 | 122 | 9 | |
| No. 2 and No. 3 air tube x Air switching valve | 10 | 102 | 7 | |
| Air switching valve x Engine | 21 | 214 | 15 | |
| Air tube x Cylinder block and timing chain cover | 10 | 102 | 7 | |
| Front water by-pass joint x Cylinder head LH and RH | 21 | 214 | 15 | |
| No. 2 water by-pass pipe x Front water by-pass joint, timing chain cover and oil filter bracket | 10 | 102 | 7 | |
| Air injection control driver (for Bank 1 and Bank 2) x Air injection control racket | 2.0 | 20 | 18 | |
| Air injection control racket x Air injection control racket | 5.0 | 51 | 44 in.*lbf | |
| Air injection control bracket x Body panel | 8.0 | 82 | 71 in.*lbf | |
| Canister x Body panel | 29 | 296 | 21 | |
| Purge VSV x Intake manifold | 21 | 214 | 15 | |
| PCV valve x Separator case | 5.0 | 51 | 44 in.*lbf | |