LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Brake Control) >> Steering Angle Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING ANGLE SENSOR  (See INSTALLATION )
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL UPPER STEERING COLUMN COVER  (See INSTALLATION )
  4. INSTALL LOWER STEERING COLUMN COVER  (See INSTALLATION )
  5. ADJUST SPIRAL CABLE  (See INSTALLATION )
  6. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  7. INSTALL STEERING PAD  (See INSTALLATION )
  8. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  9. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals