LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Auto Cruise Control System) >> ICC >> Action Test >> ICC System Running Test >> Vehicle-To-Vehicle Distance Control Mode >> Check For Distance Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check For Distance Switch

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine.
  2. Press the MAIN switch for less than 1.5 seconds.
  3. Press the DISTANCE switch.
  4. Check if the set distance indicator changes display in order of:

    (Long)โ†’(Middle)โ†’(Short).

    NOTE: The set distance indicator shows (Long) immediately after the engine starts.
    Fig 1: Identifying Vehicle Distance Indicator Display
    G05223063Courtesy of NISSAN MOTOR CO., U.S.A.