LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly and Assembly >> Disassembly >> Mainshaft Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mainshaft Assembly

  1. Separate front case and rear case, then remove mainshaft assembly. Refer to "FRONT CASE AND REAR CASE ".
  2. Remove snap ring from mainshaft.
  3. Remove spacer from mainshaft.
  4. Remove electric controlled coupling and sprocket from mainshaft.
  5. Remove needle bearing from mainshaft.
    Fig 1: Removing Snap Ring From Mainshaft
    G05225371Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals