LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M45 x >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (VK45DE) - Component And System Troubleshooting >> ICC Brake Switch >> Component Inspection >> ICC Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ICC Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ICC brake switch harness connector.
  3. Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY CONDITIONS

    Condition Continuity
    Brake pedal: Fully released Should not exist
    Brake pedal: Slightly depressed Should exist
  4. If NG, adjust ICC brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.
    Fig 1: Checking Continuity Between ICC Brake Switch Terminals 1 And 2
    G04900677Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals