Terminals and Reference Values for Automatic Drive Positioner Control Unit
AUTOMATIC DRIVE POSITIONER CONTROL UNIT CONNECTOR TERMINAL REFERENCE VALUES
| Terminal | Wire color | Item | Signal Input/Output | Condition | Voltage (V) (Approx) |
|---|---|---|---|---|---|
| 1 | Y | Tilt switch UP signal | Input | Tilt switch is UP operation | 0 |
| Other than above | 5 | ||||
| 5 | L/R | Mirror sensor (RH vertical) signal | Input | When mirror motor RH is UP or DOWN operation | Changes between 4.2 (close to perk) 0.5 (close to valley) |
| 6 | LG | Mirror sensor (LH vertical) signal | Input | When mirror motor LH is UP or DOWN operation | Changes between 4.2 (close to perk) 0.5 (close to valley) |
| 7 | L | Tilt sensor signal | Input | Tilt position: Top | 1 |
| Tilt position: Bottom | 3.8 | ||||
| 9 | LG | Memory switch 1 signal | Input | Memory switch 1 ON | 0 |
| Other than above | 5 | ||||
| 10 | O | UART LINE (TX) | Output | Tilt switch operated | |
| 11 | R | Telescopic switch forward signal | Input | When telescopic switch is forward operation | 0 |
| Other than above | 5 | ||||
| 12 | R/G | Memory switch indictor 1 signal | Input | When illuminate indictor 1 | 1 |
| Other than above | Battery voltage | ||||
| 13 | P | Memory switch indictor 2 signal | Input | When illuminate indictor 2 | 1 |
| Other than above | Battery voltage | ||||
| 14 | L | Mirror motor RH UP signal | Output | When mirror motor RH UP operation | Battery voltage |
| Other than above | 0 | ||||
| 15 | G | Mirror motor RH LEFT signal | Output | When mirror motor RH LEFT operation | Battery voltage |
| Other than above | 0 | ||||
| 16 | W/L | Mirror motor LH DOWN signal | Output | When mirror motor LH DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| Mirror motor LH RIGHT signal | When mirror motor LH RIGHT operation | Battery voltage | |||
| Other than above | 0 | ||||
| 17 | LG | Tilt switch DOWN signal | Input | When tilt switch is DOWN position | 0 |
| Other than above | 5 | ||||
| 21 | SB | Mirror sensor (RH horizontal) signal | Input | When mirror motor RH is LEFT or RIGHT operation | Changes between 3.5 (close to left edge) 0.5 (close to right edge) |
| 22 | O/L | Mirror sensor (LH horizontal) signal | Input | When mirror motor LH is LEFT or RIGHT operation | Changes between 0.5 (close to left edge) 3.5 (close to right edge) |
| 23 | GR | Telescopic sensor input | Input | Telescopic position: Top | 4.6 |
| Telescopic position: Bottom | 0.4 | ||||
| 24 | BR/W | Set switch signal | Input | Set switch ON | 0 |
| Other than above | 5 | ||||
| 25 | LG/B | Memory switch 2 signal | Input | Memory switch 2 ON | 0 |
| Other than above | 5 | ||||
| 26 | P | UART LINE (RX) | Input | Tilt switch is operated | |
| 27 | W | Telescopic switch backward signal | Input | Telescopic switch turned to backward | 0 |
| Other than above | 5 | ||||
| 30 | GR | Mirror motor RH DOWN signal | Output | When mirror motor RH DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| Mirror motor RH RIGHT signal | When mirror motor RH RIGHT operation | Battery voltage | |||
| Other than above | 0 | ||||
| 31 | BR | Mirror motor LH UP signal | Output | When mirror motor LH UP operation | Battery voltage |
| Other than above | 0 | ||||
| 32 | V | Mirror motor LH LEFT signal | Output | When mirror motor LH LEFT operation | Battery voltage |
| Other than above | 0 | ||||
| 33 | W | Sensor power supply | Input | - | 5 |
| 34 | R | Power source (Fuse) | Input | - | Battery voltage |
| 35 | LG | Tilt motor UP signal | Output | Tilt switch is UP operation | Battery voltage |
| Other than above | 0 | ||||
| 36 | P | Telescopic motor forward signal | Output | Telescopic switch is forward operation | Battery voltage |
| Other than above | 0 | ||||
| 39 | L | Power source (C/B) | Input | - | Battery voltage |
| 40 | B | Ground | - | - | 0 |
| 41 | Y | Sensor ground | - | - | 0 |
| 42 | G | Tilt motor DOWN signal | Output | Tilt switch is DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| 44 | G | Telescopic motor backward signal | Output | Telescopic switch is backward operation | Battery voltage |
| Other than above | 0 | ||||
| 48 | B | Ground | - | - | 0 |