LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> M45 x >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VK45DE) - DTCS U1000 Through P0159 >> DTC P0011, P0021 IVT Control >> Component Inspection >> Intake Valve Timing Control Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Valve Timing Control Position Sensor

  1. Disconnect intake valve timing control position sensor harness connector.
  2. Loosen the fixing bolt of the sensor.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Sensor For Chipping
    G04900154Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown below.
    RESISTANCE SPECIFICATION

    Terminal No. (Polarity) Resistance Ω [at 25°C (77°F)]
    3 (+) - 1 (-) Except 0 or ∞
    2 (+) - 1 (-)
    3 (+) - 2 (-)
  6. If NG, replace intake valve timing control position sensor.
    Fig 2: Checking Resistance Between Terminals
    G04900155Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals