Conditions Of Vehicle (Operating Conditions)
- Engine start function is ON when setting on CONSULT-III.
- Mechanical key is not inserted in key cylinder.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
SYMPTOM CHART
| Symptom | Diagnosis/service procedure | reference |
|---|---|---|
| Ignition switch does not turn on with Intelligent Key. [LCD displays "KEY DETECTED"] | 1. Check steering lock solenoid. | STEERING LOCK UNIT |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| Ignition switch does not turn on with Intelligent Key. [LCD does not display "PUSH" with arrow toward key cylinder] | 1. Check Intelligent Key unit power supply and ground circuit. | POWER SUPPLY AND GROUND CIRCUIT |
| 2. Check ignition knob switch. | IGNITION KNOB SWITCH | |
| 3. Check key switch (BCM input). | KEY SWITCH (BCM INPUT) | |
| 4. Check key switch (Intelligent Key unit input). | KEY SWITCH (INTELLIGENT KEY UNIT INPUT) | |
| 5. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| Ignition switch does not turn on with Intelligent Key. [LCD displays "NO KEY"] | 1a. Check inside key antenna 1 (rear of center console). | INSIDE KEY ANTENNA 1 (REAR OF CENTER CONSOLE) |
| 1b. Check inside key antenna 2 (luggage compartment). | INSIDE KEY ANTENNA 2 (LUGGAGE COMPARTMENT) | |
| 1c. Check inside key antenna 3 (front of center console). | INSIDE KEY ANTENNA 3 (FRONT OF CENTER CONSOLE) | |
| 1d. Check inside key antenna 4 (overhead console area). | POWER SUPPLY AND GROUND CIRCUIT | |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| Ignition switch does not turn on with mechanical key | 1. Check key switch (BCM input). | KEY SWITCH (BCM INPUT) |
| 2. Check key switch (Intelligent Key unit input). | KEY SWITCH (INTELLIGENT KEY UNIT INPUT) | |
| Engine cannot be cranked with transmission in "Park" or in "Neutral" position with brake pedal depressed. | 1. Check transmission signal. | TM-44 |
| 2. Check stop lamp switch. | EXL-78 |