Component Inspection

1. Turn ignition switch OFF.
2. Disconnect brake fluid level switch connector.
3. Check continuity between brake fluid level switch terminals.
   CONTINUITY REFERENCE CHART
   
   

   Brake fluid level switch	Condition	Continuity
   Terminal
   1 - 2	When brake fluid is full in the reservoir tank.	No
   	When brake fluid is empty in the reservoir tank.	Yes

   Fig 1: Identifying Continuity Between Brake Fluid Level Switch Terminals

   Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace brake fluid level switch.