LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1148 To P2A03 >> DTC P1572: ICC Brake Switch >> Component Inspection >> ICC Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ICC Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ICC brake switch harness connector.
  3. Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY REFERENCE CHART

    Condition Continuity
    Brake pedal: Fully released. Should exist.
    Brake pedal: Slightly depressed. Should not exist.

    If NG, adjust ICC brake switch installation, refer to "INSPECTION AND ADJUSTMENT ", and perform step  3 again.

    Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
    G05739647Courtesy of NISSAN MOTOR CO., U.S.A.