Shift Lock Control Unit Inspection Table
Data are reference values.
SHIFT LOCK CONTROL UNIT INSPECTION CHART
| TERMINAL NO. | WIRE COLOR | ITEM | CONDITION | VOLTAGE (Approx.) | ||
|---|---|---|---|---|---|---|
| 1 | Y/R | Power source | Ignition switch: "ON" | Battery voltage | ||
| Ignition switch: "OFF" | Battery voltage | |||||
| 2 | L/R | Detention switch (for key) | When selector lever is not in "P" position with key inserted. | Battery voltage | ||
| Except the above | 0V | |||||
| 3 | GR | Detention switch (for shift) | When selector lever is not in "P" position | Battery voltage | ||
| Except the above | 0V | |||||
| 4 | R/G | Stop lamp switch | When brake pedal is depressed | Battery voltage | ||
| When brake pedal is released | 0V | |||||
| 5 | W/R | Vehicle speed signal | - | - | ||
| 6 | G/R | Ignition signal | Ignition switch: "OFF" | 0V | ||
| Ignition switch: "ON" | Battery voltage | |||||
| 7 | R/W | Shift lock solenoid | When brake pedal is depressed with ignition switch "ON". | 0V | ||
| When brake pedal is depressed. | Battery voltage | |||||
| 8 | B | Ground | Always | 0V | ||
| 9 | R | Key lock solenoid | When the selector lever is set to a position other than the "P" position, and the key switch is turned from "ON" to "OFF" | Battery voltage for approx. 0.1 sec. ((1)) | ||
| Except the above | 0V | |||||
| 10 | W/G | Key unlock solenoid | When ignition switch is not in "ON" position with key inserted. | Battery voltage for approx. 0.1 sec. ((1)) | ||
| Except the above | 0V | |||||
|
||||||