DTC Detection Logic
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC
.
- If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC
.
DTC DETECTION LOGIC TABLE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B260F |
INTERRUPTION OF ENGINE STATUS SIGNAL |
BCM is not yet received the engine status signal from ECM when ignition switch is in ON position |
ECM |