Data Monitor
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR ITEMS CONDITION
| Monitor Item | Condition |
|---|---|
| REQ SW-DR | Indicates [ON/OFF] condition of door request switch (driver side). |
| REQ SW-AS | Indicates [ON/OFF] condition of door request switch (passenger side). |
| REQ SW-RR |
NOTE:
This item is displayed, but cannot be monitored.
|
| REQ SW-RL |
NOTE:
This item is displayed, but cannot be monitored.
|
| REQ SW-BD/TR | Indicates [ON/OFF] condition of back door request switch. |
| PUSH SW | Indicates [ON/OFF] condition of push-button ignition switch. |
| IGN RLY2 -F/B | Indicates [ON/OFF] condition of ignition relay 2. |
| CLUCH SW |
NOTE:
This item is displayed, but cannot be monitored.
|
| BRAKE SW 1 | Indicates [ON/OFF] condition of brake switch. |
| DETE/CANCL SW | Indicates [ON/OFF] condition of P position. |
| SFT PN/N SW | Indicates [ON/OFF] condition of P or N position. |
| S/L-LOCK | Indicates [ON/OFF] condition of steering lock unit (LOCK). |
| S/L-UNLOCK | Indicates [ON/OFF] condition of steering lock unit (UNLOCK). |
| S/L RELAY-F/B | Indicates [ON/OFF] condition of ignition switch. |
| UNLK SEN-DR | Indicates [ON/OFF] condition of driver door UNLOCK status. |
| PUSH SW-IPDM | Indicates [ON/OFF] condition of push-button ignition switch. |
| IGN RLY1 -F/B | Indicates [ON/OFF] condition of ignition relay 1. |
| DETE SW-IPDM | Indicates [ON/OFF] condition of P position. |
| SFT PN-IPDM | Indicates [ON/OFF] condition of P or N position. |
| SFT P-MET | Indicates [ON/OFF] condition of P position. |
| SFT N-MET | Indicates [ON/OFF] condition of N position. |
| ENGINE STATE | Indicates [STOP/START/CRANK/RUN] condition of engine states. |
| S/L LOCK-IPDM | Indicates [ON/OFF] condition of steering lock unit (LOCK). |
| S/L UNLK-IPDM | Indicates [ON/OFF] condition of steering lock unit (UNLOCK). |
| S/L RELAY-REQ | Indicates [ON/OFF] condition of steering lock relay. |
| VEH SPEED 1 | Display the vehicle speed signal received from combination meter by numerical value [Km/h]. |
| VEH SPEED 2 | Display the vehicle speed signal received from ABS or VDC or CVT by numerical value [Km/h]. |
| DOOR STAT-DR | Indicates [LOCK/READY/UNLOCK] condition of driver side door status. |
| DOOR STAT-AS | Indicates [LOCK/READY/UNLOCK] condition of passenger side door status. |
| ID OK FLAG | Indicates [SET/RESET] condition of key ID. |
| PRMT ENG STRT | Indicates [SET/RESET] condition of engine start possibility. |
| PRMT RKE STRT |
NOTE:
This item is displayed, but cannot be monitored.
|
| KEY SW-SLOT | Indicates [ON/OFF] condition of key slot. |
| TRNK/HAT MNTR |
NOTE:
This item is displayed, but cannot be monitored.
|
| RKE-LOCK | Indicates [ON/OFF] condition of LOCK signal from Intelligent Key. |
| RKE-UNLOCK | Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key. |
| RKE-TR/BD |
NOTE:
This item is displayed, but cannot be monitored.
|
| RKE-PANIC | Indicates [ON/OFF] condition of PANIC button of Intelligent Key. |
| RKE-P/W OPEN | Indicates [ON/OFF] condition of P/W DOWN signal from Intelligent Key. |
| RKE-MODE CHG | Indicates [ON/OFF] condition of MODE CHANGE signal from Intelligent Key. |
| RKE OPE COUN1 | When remote keyless entry receiver receives the signal transmitted while operating on Intelligent Key, the numerical value start changing. |
| RKE OPE COUN2 |
NOTE:
This item is displayed, but cannot be monitored.
|