Operation Procedure
- Turn ignition switch ON.
- Adjust seat position [sliding, reclining, lifting (rear)].
- The steering and outside mirror is adjusted automatically.
NOTE:
- The seat synchronization function will not operate if seat adjusting value is more than limit value.
ITEM REFERENCE
| Item |
Limit value |
| Seat sliding |
76 [mm] |
| Seat reclining |
9.1 [degrees] |
| Seat lifter (rear) |
20 [mm] |
- The seat synchronization function will not operate if the steering column or door mirror moves to the operating end while this function is operating. Perform memory function or drive the vehicle at vehicle speed of 7 km/h or more once to activate this function again.
- If the seat position is uncomfortable after the adjustment, seat position can be adjusted easily by memory operation.