Detailed Flow

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

GO TO 2.
CHECK SYMPTOM 1
Check the following items based on the information obtained from the customer.
- Fail-safe. Refer to "FAIL-SAFE ".
- A/T fluid inspection. Refer to "INSPECTION ".
- Stall test. Refer to "INSPECTION AND JUDGMENT ".
- Line pressure test. Refer to "INSPECTION AND JUDGMENT ".
GO TO 3.
CHECK DTC
1. Check DTC.
2. Perform the following procedure if DTC is detected.
  - Record DTC.
  - Erase DTC. Refer to "DIAGNOSIS DESCRIPTION ".
Is any DTC detected?

YES: GO TO 4.

NO: GO TO 6.
PERFORM DIAGNOSTIC PROCEDURE
Perform "Diagnosis Procedure" for the displayed DTC.

GO TO 5.
PERFORM DTC CONFIRMATION PROCEDURE
Perform "DTC CONFIRMATION PROCEDURE" for the displayed DTC.

Is any DTC detected?

YES: GO TO 4.

NO: GO TO 6.
CHECK SYMPTOM 2
Try to confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 7.

NO: INSPECTION END
ROAD TEST
Perform "ROAD TEST". Refer to "DESCRIPTION ".

GO TO 8.
CHECK SYMPTOM 3
Try to confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 2.

NO: INSPECTION END