Component Inspection (Manual Mode Switch)

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MANUAL MODE SWITCH

Check continuity between terminals.

CONTINUITY CHART

Control device harness connector			Condition	Continuity
Connector	Terminal		Condition	Continuity
M137	1	4	Selector lever: Manual (Neutral)	Existed
	1		Other than the above	Not existed
	2		Selector lever: DOWN (- side)	Existed
	2		Other than the above	Not existed
	3		Selector lever: UP (+ side)	Existed
	3		Other than the above	Not existed
	5		Selector lever: "D" position (Auto)	Existed
	5		Other than the above	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Repair or replace damaged parts. Refer to "2WD : EXPLODED VIEW " (2WD), "AWD : EXPLODED VIEW " (AWD).