Special Repair Requirement
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.GO TO 2.
- REPLACE BCM
Replace BCM. Refer to EXPLODED VIEW .
GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to SPECIAL REPAIR REQUIREMENT .
GO TO 4.
- INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
WORK END