DTC Confirmation Procedure

CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform "AIR BAG" Self Diagnostic Result with CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to "DIAGNOSIS WITH AIR BAG WARNING LAMP ".
  NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
  
  Is malfunctioning part detected?
  
  YES: Refer to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END