LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> EX35 Base, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ICC Brake Switch >> Component Inspection (ICC Brake Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection (ICC Brake Switch)

  1. CHECK ICC BRAKE SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ICC brake switch harness connector.
    3. Check the continuity between ICC brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Existed
      Slightly depressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. CHECK ICC BRAKE SWITCH-II
    1. Adjust ICC brake switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ICC brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Existed
      Slightly depressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ICC brake switch.

scientia non olet · About LEMON Manuals