Component Inspection
- CHECK REAR WHEEL STEERING ANGLE SENSOR
- Turn the ignition switch OFF.
- Disconnect the rear wheel steering angle sensor harness connector.
- Check the resistance between the rear wheel steering angle sensor connector.
RESISTANCE SPECIFICATIONRear wheel steering angle sensor Resistance (Approx.) Connector Terminal B53 1 4 1 kΩ 1 2 1.2 - 1.5 kΩ 1 3 1.2 - 1.5 kΩ Is the inspection result normal?
YES: INSPECTION END
NO: Replace RAS actuator assembly. Refer to "EXPLODED VIEW ".