Active Test: Notes
CAUTION:
- Do not perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be started when ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp are ON.
- ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp are ON during active test.
- Erase memory of the lane camera unit after implementing active test. Refer to "CONSULT-III FUNCTION (LANE CAMERA) ".
NOTE:
- When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal. Only solenoid valve and ABS motor.
- "TEST IS STOPPED" is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" is displayed, to perform test again.